This Analog / Digital PWM Controller gives you the most flexibility for your application. Give your project a high-tech feel with push button speed control. It can also be used as a low voltage light dimmer for halogen lamps, or for controlling heaters and irons.
Note: This board will be a hard-configured version of the SPD-815, which is a drop-in replacement for the SPD-2115B-EDS.
The soft-start DIP switch is not active as the controller is hardwired to work as the SPD-2115B-EDS without user configuration.
For a nominal cost savings, choose the SPD-815 controller instead. The 815 provides user-selectable analog/digital and soft-start options all in one board.
4 Ways to Control:
- Analog:
- Potentiometer
- 0V - 5V analog voltage level
- Digital Mode:
- Push Buttons - UP and DOWN buttons to control speed
- Logic Mode - pulse the UP or DOWN lines to change speed.
Additional Features:
- Analog or Digital Modes selectable via jumpers
- Automatic Soft Start reduces stress on mechanics and power supplies
- High efficiency MOSFET design for cool operation
- 5.5 - 36 VDC operation>/strong>
- Digital input filtering allows smooth control even with noisy inputs
- Logic Controller Enable input
Specifications:
- 15 Amps continuous current
- 5.5 - 36 VDC operation
- PWM Range: 0% - 100%
- Single direction (no reverse)
Connections:
- Terminal blocks for signal and power connections
Technical Documents:
Datasheet (PDF)
Dimensions:
2.0 x 2.7 x 0.7 inches tall.
For a comparison of motor control features, check out the parametric selection guide.